IP68 RGB LED strip kit for swimming pool waterfalls

RGB lighting for swimming pool waterfalls

The RGB LED strip kit for a swimming pool waterfall It is designed to incorporate decorative lighting into a compatible sheet-style waterfall. The light is integrated into the waterfall structure and helps to visually enhance the flow of the water, particularly in night-time installations or outdoor pool areas.

The range is available in various sizes. The professional should select the variant that corresponds to the width of the waterfall that is already installed or planned for the project.

Complete lighting kit – LED strip for a swimming pool waterfall

The supply includes the components required to control the lighting:

• RGB LED strip.
• Power supply.
• Signal receiver.
• Remote control.
• Four metres of cable.

These components are included in the various models currently sold by Trypool.

Various sizes available

The different variants allow the lighting to be adapted to waterfalls of various widths. The size must be selected from the product drop-down menu before adding it to your order.

A variant should not be chosen solely on the basis of the available space. It is necessary to check that the dimensions correspond to the sheet cascade with which it is to be installed.

RGB lighting control – LED strip for a swimming pool waterfall

The included receiver and remote control allow you to control the waterfall’s RGB lighting. The current product listing also states that the system may be compatible with and synchronisable with Trypool’s four-wire lighting system.

The timing should be checked prior to installation, particularly if you wish to synchronise the waterfall with projectors, spotlights or other RGB lighting features in the swimming pool.

Recommended applications

The kit can be used for:

• Sheet metal waterfalls for swimming pools.
• Outdoor swimming pools.
• Indoor swimming pools.
• Spas.
• Jacuzzis.
• Decorative lighting projects.
• Replacing a compatible LED strip.
• Co-ordinated installations with four-wire RGB lighting.

The current product information sheet states that it is suitable for use in indoor and outdoor swimming pools, spas and hot tubs.

Installation recommendations

It is recommended that an accessible access point be provided on the wall where the waterfall is installed. This access facilitates:

• Connecting the LED strip.
• Installation of the receiver and the source.
• Checking the connections.
• Future replacement of the strip.
• System maintenance.

This recommendation is particularly important because a fully enclosed installation can make any subsequent repairs or replacements difficult. The current guidelines also recommend creating an access panel in the wall of the cascade.

Selecting the variant

Before placing your order, please check the following:

1. The measurement of the sheet cascade.
2. The model number of the installed unit.
3. The space available for the strip.
4. The location of the power supply.
5. The total length of cable required.
6. Compatibility with other lighting systems.
7. The possibility of accessing the equipment at a later date.

When using a replacement part, it is advisable to check the original part number and not to select the strip based solely on an approximate measurement.

Warnings

The electrical installation must be carried out by a qualified professional and must comply with the product instructions and the relevant regulations.

The power supply and the receiver must be installed in the designated location for each component, without assuming that all the components in the kit can remain submerged.

Keep the product and the remote control out of the reach of children.

sheet cascade